Any listing in this product directory or other related materials, where “NRTL” appears next to the product name was tested and is listed by ARL as an NRTL, consistent with the requirements of the NRTL Directive.  Other products are listed solely by ARL under its accreditation to ISO 17025 and ISO 17026.


The products listed here cover track lighting systems intended for permanent connection to sources of supply in commercial or residential ordinary locations in accordance with the National Electrical Code, NFPA 70. The track lighting systems covered by this standard are rated:

a)      300 volts or less;

b)      150 volts or less to ground; and

c)       50 amperes or less.

Lighting track is intended to be permanently installed and permanently connected to a branch circuit not exceeding 277 volts, nominal to ground, and 50 amperes.

These requirements under this section cover:

a)       Track networks consisting of track and connectors;

b)       Mono-, duo-, and multi-point canopies;

c)        Incandescent, fluorescent, and high intensity discharge (HID) luminaire assemblies intended to be electrically connected to and physically supported by the track in track networks and canopies;

d)       Mounting means for the track; and

e)       Accessories.

These requirements under this section do not cover:

  • Busways intended for lighting, receptacles, or other general-purpose adaptors covered by the Standard for Busways, UL 857, and intended for use in accordance with Article 364 of the National Electrical Code, NFPA 70; or
  • Track lighting systems for marine use aboard a ship or boat.

Track lighting systems listed here are not intended for use:

a)       In wet or damp locations;

b)       In installations where the track is concealed;

c)       In hazardous locations;

d)       Where subject to physical damage;

e)       Where the track is extended through walls or partitions of building structures;

f)         Where subject to corrosive vapors; or

g)       In storage battery rooms.

A track lighting luminaire assembly that uses a tungsten-halogen lamp, fluorescent lamp, or high-intensity-discharge lamp shall also comply with the applicable requirements from the Standard for Luminaires, UL 1598.

A product that contains features, characteristics, components, materials, or systems new or different from those covered by the requirements in this Standard, and that involve a risk of fire, electric shock, or injury to persons shall be evaluated using the appropriate additional component and end-product requirements as determined necessary to maintain the acceptable level of safety as originally anticipated by the intent of this Standard. A product whose features, characteristics, components, materials, or systems conflict with specific requirements or provisions of this Standard cannot be judged to comply with this Standard. Where considered appropriate, revision of requirements shall be proposed and adopted in conformance with the methods employed for development, revision, and implementation of this Standard.

Only products which properly bear the ARL Listing Mark (Label) are considered Listed by ARL.


Delisted products appear with a double strike through and “DELISTED” after the report number.
Deleted/revised models for listed products appear with a single strike through.



Listed Product Directory (revised 01.13.15)