Any listing in this product directory or other related materials, where “NRTL” appears next to the product name was tested and is listed by ARL as an NRTL, consistent with the requirements of the NRTL Directive.  Other products are listed solely by ARL under its accreditation to ISO 17025 and ISO 17026.


The products listed here are fire doors and frames, fire door assemblies, smoke and draft control doors and frames, trash chute doors, trash chute door assemblies and other doors and door assemblies of various materials and types of construction that are intended to retard the passage of fire through wall openings.

The term “Fire Door Assembly” includes the door, frame or guide and necessary listed hardware.  The mounting and operating parts are especially designed for the door and are not interchangeable.

The term “Fire Door” pertains to the door and does not include the frame, hardware or other accessories with which it is installed unless otherwise specified.  Authorities having jurisdiction should be consulted concerning the type, mounting, listed hardware, listed frame and listed closing mechanism acceptable for any given location.

Each product is marked with the name or trademark of the (manufacturer) or vendor, fire rating, fire class and, if applicable, the minimum bolt throw requirement.  Additionally, the product may also be marked with a distinctive type, style, catalog or model designation.

These products comply with ARL requirements which include pertinent sections of ASTM E152, Standard Test Methods of Fire Tests of Door Assemblies, and are intended for installation in accordance with the Standard for Fire Doors and Windows, ANSI/NFPA 80.

A product that contains features, characteristics, components, materials, or systems new or different from those covered by the requirements of the standard, and that involve a risk of fire, electric shock, or injury to persons, have been evaluated using the appropriate additional component and end-product requirements as determined necessary to maintain the acceptable level of safety as originally anticipated by the intent of the standard.  A product whose features, characteristics, components, materials, or systems conflict with specific provisions of the standard have been judged to be in non-compliance with the standard.

Only products which properly bear the ARL Listing Mark (Label) are considered Listed by ARL.


Delisted products appear with a double strike through and “DELISTED” after the report number.
Deleted/revised models for listed products appear with a single strike through.



Listed Product Directory (revised 01.13.15)