Any listing in this product directory or other related materials, where “NRTL” appears next to the product name was tested by ARL as a NRTL.  The NRTL status for these listed products was valid through January 27th, 2008 unless previously delisted.  These products may remain listed solely by ARL. However, they are no longer under the surveillance of the NRTL program.

INCANDESCENT LIGHTING FIXTURES

The products listed here are general use incandescent electric lighting fixtures for commercial, industrial or residential use in ordinary locations in accordance with the National Electrical Code, ANSI/NFPA 70.

Requirements for this category do not cover:

A.            Fixtures for installation aboard a ship or boat;

B.            Fixtures for underwater installation;

C.            Fixtures for use in hazardous locations;

D.            Portable lamps;

E.            Portable electric hand lamps, stage and studio lights, medical and dental lights, and the like;

F.            Electric discharge lamp type fixtures, including fluorescent and high intensity discharge lamp types;

G.            Emergency lighting fixtures, or fixtures with integral batteries, or exit fixtures;

H.            Fixtures provided with adapters or other forms of construction to enable them to be mounted on, or supported by any other fixture, lampholder, or receptacle;

I.            Fixtures intended for field mounting to furniture as part of a cord connected task lighting assembly;

J.            Lighting units having flashing characteristics, words or symbols designed to convey information or attract attention (exclusive of exit lighting); or

K.            Low voltage fixtures, for use in recreational vehicles, that are supplied solely by nominal automotive battery voltage.

A fixture provided with lampholders for both incandescent and high intensity discharge lamps (a combination incandescent / high intensity discharge lamp fixture) complies with the Standard for High Intensity

Discharge Lighting Fixtures, UL 1572, and with the requirements of the standard for this category insofar as they apply to construction, test methods, and marking requirements unique to incandescent lamps.

A bathroom cabinet fixture has been judged under the general requirements of the standard for this category and under the applicable requirements for metal thickness and ventilation openings.

Each product is marked with the name or trademark of the (manufacturer) or vendor, a distinctive style, type, catalog or model designation, date code, electrical ratings expressed in volts,

amperes or watts, frequency, maximum lamp wattage, electrical hazard warnings and other cautionary and hazard warnings as applicable.

These products comply with ARL requirements which include pertinent sections of the Standard for Safety, ANSI/UL 1571, Incandescent Lighting Fixtures.

A product that contains features, characteristics, components, materials, or systems new or different from those covered by the requirements of the standard, and that involve a risk of fire, electric shock, or injury to persons, have been evaluated using the appropriate additional component and end-product requirements as determined necessary to maintain the acceptable level of safety as originally anticipated by the intent of the standard.  A product whose features, characteristics, components, materials, or systems conflict with specific provisions of the standard have been judged to be in non-compliance with the standard.

Only products which properly bear the ARL Listing Mark (Label) are considered Listed by ARL.


NOTE:

Delisted products appear with a double strike through and “DELISTED” after the report number.
Deleted/revised models for listed products appear with a single strike through.

_________________________________________________________________________________

APPLIED RESEARCH LABORATORIES OF SOUTH FLORIDA, LLC

Listed Product Directory (revised 01.13.15)