Any listing in this product directory or other related materials, where “NRTL” appears next to the product name was tested by ARL as a NRTL.  The NRTL status for these listed products was valid through January 27th, 2008 unless previously delisted.  These products may remain listed solely by ARL. However, they are no longer under the surveillance of the NRTL program.

COMMERCIAL DRY CLEANING MACHINES (TYPE IV)

The products listed here are dry cleaning machines for use as or with Type IV systems utilizing Class IV solvents or Class IIIA solvents as defined in the Standard for Dry Cleaning Plants, NFPA 32.  The machines investigated under these requirements are intended for use with solvents or liquids classed as non-flammable or as having a maximum numerical fire hazard rating of 5, in accordance with the Standard for Tests for Comparative Flammability of Liquids, UL 340.  The requirements for this category cover dry cleaning machines that are rated 600 volts or less and that employ no universal motor rated more than 250 volts.  The products are intended for use in commercial cleaning establishments, in which the machine or system ordinarily is not accessible to the general public while in operation.  Requirements for this category do not cover machines intended for use in Type V operations, in which the machine or system is accessible to or used by the general public.

A dry cleaning machine is considered to be a unit (usually not including any associated equipment) intended to clean fabrics only, or to clean and damp dry fabrics.  If a unit is designated as a dry cleaning system, all the elements for the cleaning and complete drying process are considered as a whole.  In either case, all elements of a machine or system and commercially used accessories and associated equipment, such as cleaning liquid transfer pumps, reclaimers, air compressors, drying tumblers, and the like, have been investigated under these requirements and under such additional requirements as are applicable to the element or accessory under consideration.  An accessory is covered either as an integral part of a dry cleaning system or as an individually installed, but associated, component.

Each product is marked with the name or trademark of the (manufacturer) or vendor, a distinctive type, style, model or catalog designation, date code, electrical ratings, electrical hazard warnings, wiring diagram, type and amount of cleaning agent employed, air venting requirements, and other cautionary and hazard warnings as applicable.

These products comply with ARL requirements which include pertinent sections of the Standard for Safety, ANSI/UL 664, Commercial Dry Cleaning Machines (Type IV) and are for use in ordinary locations in accordance with the National Electrical Code, ANSI/NFPA 70.

A product that contains features, characteristics, components, materials, or systems new or different from those covered by the requirements of the standard, and that involve a risk of fire, electric shock, or injury to persons, have been evaluated using the appropriate additional component and end-product requirements as determined necessary to maintain the acceptable level of safety as originally anticipated by the intent of the standard.  A product whose features, characteristics, components, materials, or systems conflict with specific provisions of the standard have been judged to be in non-compliance with the standard.

Only products which properly bear the ARL Listing Mark (Label) are considered Listed by ARL.

NOTE:

Delisted products appear with a double strike through and “DELISTED” after the report number.
Deleted/revised models for listed products appear with a single strike through.

_________________________________________________________________________________

APPLIED RESEARCH LABORATORIES OF SOUTH FLORIDA, LLC

Listed Product Directory (revised 01.13.15)